Log in

View Full Version : EVERYTHING SOLD!! Breaking down prop. system



Dozer
Sun, 6th Apr 2008, 08:02 PM
I'm breaking down a growout system and selling off all livestock and some equipment. There might be some more stuff that I can’t think of right now so I may add more later. Some of the equipment will need to wait until the livestock is all gone, but some of it can go sooner- so just ask. Of course, some prices may be more negotiable than others :) You can send me messages, or honestly email or phone call would be even better.
edit- if you want pics of something, let me know. Obviously in person is best but if someone has a long drive I can understand wanting to see a pic first!

Thanks for looking.
-Mike

Livestock:

Live rock- I'll sell it for about $3/lb. Also, for every 5 lbs. of rock you buy I'll give you a lb. of rock free. Some pieces have some corals, but almost no corals left. Some of the rock is uglier so I’ll let them go for $2/lb.

Live sand- I have a LOT of live sand too- probably a few hundred lbs when it was dry. If you buy some other stuff, or if you just want a scoop or something you can have some sand. If you want a large amount of it and you're not buying anything else from me, we'll work something out but I'm not looking to make money on live sand honestly :)

Fish- BIG mature mated pair of maroon clowns. These clowns have laid eggs many times. I’d like about $75 for the pair. (SOLD)

BTA- I think I have 2 of these left- one is small, one is definitely bigger. First come first serve so get here first to pick which one you want. Both the same price, I’ll take $25 each for them- little more if it’s on a big rock and you want the big rock too- otherwise we’ll chip some of the rock off. I don’t want to rip them off the rock. (SOLD)


Equipment:
Tunze 6060- barely used, very good condition. These go for about $150 new, I'll take $115 for it. (sale pending)

Sequence Hammerhead pump- About 2 years old, maybe a little less. These go for about $320-$340 new (plus shipping) I'll take $175 for it. This is a really good deal for this pump. I won't lower it anymore, I'll just throw it on eBay- but I'd rather it went to a MAASTARD :)

METAL HALIDE 400 WATT ASSEMBLED BALLAST from Hamilton Technology. These go for $119 new direct from Hamilton Technology. Some of them are brand new in the box, I'll take $75 for those. Some of them have been running in a saltwater environment and thus have some surface rust. They still work fine but they look kind of rough. I'll take $40 for those.

LumenMax Reflector- I have 3 of these in GREAT condition. Literally barely used. These go for $120 direct from sunlight supply (plus shipping). I’ll take $50 each for these. Again they are in really good condition. Then I have 1 that is brand new in the box never been touched. Same price as the other 3. First come first serve, so if you get here first you can take the brand new one in the box. None of those include the socket assembly, that’s just the price for reflector. I have the socket assemblies too, see below. 1 SOLD, 3 pending sale, will take backup offers.

5kv Mogul Socket Assembly w/15ft Lamp Cord- These are $40 direct from sunlight supply (plus shipping). I’ve got one brand new in the box never been opened. I’ll take $30 for that one. I’ve got others that are slightly used but great condition. I’ll take $20 each for those. 1 SOLD, 3 pending sale, will take backup offers.

XM 400 Watt Metal Halide Bulb Mogul Base- These are brand new in the package literally never been opened. I have some 10000K and some 20000K. These go for about $75-$80 new (plus shipping). I’ll take $50 each. I’ve also got 3 of the same XM Mogul Base 400 Watt bulbs that are used. You come over here and get anything else and I’ll give you one of the used bulbs, just ask. I would estimate they have a good 50% life yet- maybe more but I will estimate low to be safe. (20000K's are pending sale, will take backup offers. I have two brand new 10000K XM bulbs still available)

Two CoralVue 250-watt Double Ended Pendant systems- Two pendants, two ballasts, two bulbs. All used. Bulbs are getting old now. I think I paid about $500 for all of this new a few years ago. [BSOLD[/B]

Aquacontroller Jr. combo pack with DC8, temp prove and pH probe and serial port option. All this together would be just under $300 new. I’ve been using it for a few years now but still in good shape. I’ll take $150 for all of it. (SOLD)

Ranco single stage temperature controller- wired and sealed for use in water. Got it last year from DIYreef.com for $80, I’ll sell it for $40. It’s in great condition. (SOLD)

Tunze Osmolator- Looks like these are going for about $195 new. I’ll take $100 for this one. I’ve used it for a few years but still works great every single day. Comes with the standard metering pump that it came with. I have it hooked up to a larger pump right now with a Tunze adapter. (SOLD)

Tunze Switched socket outlet- part# 3150.11 (3150.110). This is like an adapter made by Tunze that enables you to hook up the Osmolator to a larger pump. I can’t seem to find it anywhere online right now, so I’ll just take $25 for it. SOLD.

Aqua Medic Reefdoser Dosing Pump – Twin- I bought this about 6 months ago. I played with it a little and tested it out and then never used it, so again it’s basically brand new- I have box and everything. It’s a little dusty from sitting in my garage but it’s really never been used. Looks like it’s going for about $245 on Marine Depot, I’ll take $125 for it.

Very large homemade plywood sump. Built by me and painted by me with marine grade, fish safe epoxy paint from aquaticecosystems. It’s 8’ long, I think about 2’ tall and 2’ wide. This is a BIG sump, but someone out there may want it and I don’t really want to store it. Make me an offer on this one :) It’s already drilled and I’ll throw in the bulkhead for it too. It’s a high quality bulkhead (either 1.5” or 2”) from Premium Aquatics or Custom Aquatics, I can’t remember. By the way I'm using the sump on this system right now and it works great, so come check it out if you're interested!

undertheC
Sun, 6th Apr 2008, 08:30 PM
pm sent

Dozer
Sun, 6th Apr 2008, 08:45 PM
got your PM undertheC, will reply shortly.

Also, for everyone's benefit, I will keep strict track of time/date of posts and PM's and allow those who respond first to have first chance to buy what they want.

Dozer
Sun, 6th Apr 2008, 08:56 PM
undertheC is first in line for:
1 Lumenmax reflector (the new one in box)
1 socket assembly (the new one in box)
Aqua Medic reefdoser

She's not totally sure on some, so if anyone else has interest please get in line and if she doesn't buy any of them within a couple days or so you will be next!

Dozer
Sun, 6th Apr 2008, 09:11 PM
Ed is first in line for Tunze Switched socket outlet- part# 3150.11 (3150.110).

Dozer
Sun, 6th Apr 2008, 09:26 PM
undertheC has passed on Aqua Medic reefdoser so it is completely available.

DBlackman
Sun, 6th Apr 2008, 10:04 PM
What series is the, 'Sequence Hammerhead pump'?
Can you put me in-line for this, depending on your response?

rpc
Sun, 6th Apr 2008, 10:15 PM
Emailed about AC Jr and 3 lumenmax reflectors and ballasts.

Richard

AlexfromSATX
Sun, 6th Apr 2008, 10:38 PM
pm sent on Tunze Osmo

Dozer
Sun, 6th Apr 2008, 10:38 PM
What series is the, 'Sequence Hammerhead pump'?
Can you put me in-line for this, depending on your response?

It's the ReeFlo Hammerhead Pump, 5800 GPH, Item Code MM1158 at MD. Sorry, should have been more specific. It's been a GREAT pump for me. You are first in line for this pump.

Dozer
Sun, 6th Apr 2008, 10:40 PM
responded to rpc's email re:
AC Jr and 3 lumenmax reflectors and ballasts

rpc is first in line for AC Jr, 3 lumenmax reflectors and 3 ballasts.

Dozer
Sun, 6th Apr 2008, 10:51 PM
pm sent on Tunze Osmo

email reply sent. Thx

AlexfromSATX is first in line for Tunze Osmo

ErikH
Mon, 7th Apr 2008, 10:31 AM
Second in line for the osmo and the AC JR. Oh yeah, if they end up backing out, I will take some sand as well.

Dozer
Mon, 7th Apr 2008, 10:39 AM
Hi ScorpiNO- someone else over at ARC got in front of you for AC Jr and Osmo (or is that you or a different Erik?) If that's you, then you are indeed second :) If that's a different Erik, then you are third. Also, you are welcome to some sand either way. Bring a bucket over and take some for your troubles my friend.
Thank you for your interest!

ErikH
Mon, 7th Apr 2008, 10:57 AM
It's me. :) I had missed the thread here somehow. :p

Dozer
Mon, 7th Apr 2008, 08:16 PM
just edited the thread with some updates. Also, I'm dropping the price on the live rock to $3/lb. Also, for every 5 lbs. of live rock you buy from me I'll give you a lb. free. So come buy $25 lbs. and I'll give you 5 lbs. free.

BIGBIRD123
Mon, 7th Apr 2008, 08:52 PM
like to be in line for the AC jr Only equipment I need for the 280g.

Steve

Dozer
Mon, 7th Apr 2008, 09:29 PM
Steve- RPC did buy the AC Jr. Thank you for your interest!

ErikH
Mon, 7th Apr 2008, 11:48 PM
Steve- RPC did buy the AC Jr. Thank you for your interest!

Danggggggggggggggggg....

Dozer
Tue, 8th Apr 2008, 12:01 AM
Erik- I'll make you a good deal on something else, if there's anything else you might want...

DBlackman
Wed, 9th Apr 2008, 01:17 AM
Hey Mike, I will pass on the "ReeFlo Hammerhead Pump, 5800 GPH"... it won't fit in the stand... darn it! Another item, at a good price... passed-up

Dozer
Wed, 9th Apr 2008, 01:10 PM
Hey Mike, I will pass on the "ReeFlo Hammerhead Pump, 5800 GPH"... it won't fit in the stand... darn it! Another item, at a good price... passed-up

np, thanks for the reply!

Dozer
Wed, 9th Apr 2008, 04:51 PM
update: Looks like Steve has dibs on the Tunze 6060 and a heater.

Also, I just lowered the price on the Hammerhead. It's a great pump for someone with a big system...

ryanrichter
Thu, 10th Apr 2008, 12:51 PM
Let me check to see if it fits under my stand. If so I want it.

BIGBIRD123
Thu, 10th Apr 2008, 03:10 PM
I'll see ya at River city noon Friday, Mike.

Steve

Dozer
Thu, 10th Apr 2008, 03:16 PM
let me know Ryan.

See you then Steve!

Dozer
Fri, 11th Apr 2008, 06:20 PM
Hi everyone- at this point everything is sold or spoken for. Thanks everyone!

Ryan- sent you an email, the Hammerhead is yours if you want it, just let me know.

mattymalcolm
Mon, 14th Apr 2008, 09:42 PM
do ypu still have a socket? if so how much? this is matt the one that has the the 2bulbs and 2 ballasts. I heard that you can not just use any reflector or socket for these ballasts is this true?

Dozer
Mon, 14th Apr 2008, 10:25 PM
I'll send you a PM. You have my phone # too so feel free to call or PM.

Chris
Tue, 15th Apr 2008, 12:28 PM
If there's any sand left to get rid of i'll take it all. Just shoot me a PM.

Dozer
Tue, 15th Apr 2008, 12:33 PM
Hi Chris- sorry, I don't have any more I'm getting rid of. Thanks for looking!