Mesh Moders

[Paul28]

Check out this stuff i found and youse now last even longer flat bottem mesh and very nice stuff very nice micro bubbles Very fine http://www.premiumaquatics.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=PA&Product_Code=ENK-7210&Product_Count=&Category_Code=

[rz1a]

13"x12" for 5 dollars? not bad

have you used it? i stil have some of that enkamat pf4 or whatever its called left over, but its not that much.

[Paul28]

Yeh it works great now i need to cut my out pipe on my skimmer again to bring down the bubbles its already fully open these pumps are insane !!! im running 3 layers, finger is water line http://www.marinesolutionsinc.com/catalog/Pumps/c25/p135/Sicce-PSK-2500/product_info.html



http://img403.imageshack.us/img403/871/19356078sj6.jpg

[rz1a]

heres some from today after cleaning out my skimmer cup and having to clean out the neck. its also from marine solutions but its just the nw150 octo. it has the enkamat pf4. i think its doing well on my 28, not sure how well itll do on my 75g though. i have doubts

http://img.photobucket.com/albums/v603/rubensaurus/0405081431.jpg
http://img.photobucket.com/albums/v603/rubensaurus/0405081057a.jpg
http://img.photobucket.com/albums/v603/rubensaurus/0405081431a.jpg
http://img.photobucket.com/albums/v603/rubensaurus/0405081431b.jpg

[Paul28]

Nice yeh that mud sludge got to love it i clean mine every 2 weeks it gets to stinking up the house, in the pic i cleaned it the day before

[rz1a]

i clean mine up ever 3-4 weeks. it takes a long time for it to get like that

is your MSX the 160 or bigger? how do you like it?

[Paul28]

The skimmer im running is the MSX,SWC160 Xtreme runs great on my 120 and 30 gallon sump your skimmer would run great on your 75 the more air pulled the better just might half to cut the out pipe you can see the size of the air intake pipe i run, had a buddy take a air reading with air flow meter really can put out 50 SCFH on the 160. It seems like the more weight and denser your mesh is, the more air draw you will have. but ive relized that 35+ to 45 SCFH is alot better for the 8 inch wide skimmer if i had only bought the 200 is 10 inches wow the air i could of pulled here is a link to a nice air flow meter make shur to match the size of the intake air to your skimmer to the air flow meter http://www.dwyer-inst.com/htdocs/flow/SeriesRMPrice.cfm#CRA

[Paul28]

[quote]rz1a
is your MSX the 160 or bigger? how do you like it?[quote]

Its the 160 and ooo yeh i love it same pump as the ATI bubbleMaster and half the price few mods you need to do when you buy it but after that very very nice

[rz1a]

ive been looking into getting one, but theyre out of stock. i dont know if the fine that the distributor got is going to affect him selling more of the skimmers

[Paul28]

Thay have still been getting them in but alot are back ordered i got mine first week thay came out so ive had to fix all the problems when thay first came out now thay are plug and play, there going out of stock soon as thay arrive

[brewercm]

Is that the same stuff I got from you a while back or a newer mesh? I had seen that about a week ago on their site and was curious.

[Paul28]

no its not same stuff this stuff is spose to last longer and make even smaller bubbles

[Paul28]

Enkama 7210 Flat Bottom Mesh the pic on the link is not what it looks like looks kinda like a more open velcro, Enkamat PF4 is the stuff i gave you for some reson thay yoused that pic, PF4 is what everyone youses