akm
Wed, 5th Mar 2008, 02:57 AM
This is most of everything I've been trying to sell for awhile, so here you go.
*Here are some pictures of the tank, skimmer, and panworld.
http://s111.photobucket.com/albums/n131/matlocka0491/Equipment/
90 gallon Oceanic bowfront, tank stand and canopy. 48" long, 27" high, and 18" wide in the middle. The stain is cherry oak. Everything looks fine except on the inside bottom of the stand the water damaged the stain. $400 obo
Beckett Skimmer (by Pete), single beckett but has a place for another. 26" tall, foot print is around 8"x11". $125
Panworld 150ps, 2 years old, works great w/ basically no rust. Used on the skimmer above and worked great. $75
Pacific Coast Imports regulator and selenoid, works perfectly, never used. $75
JBJ regulator and selenoid. One gauge is bent so it doesn't work and the bubble counter is missing. $25
LED setup, 2 red lights and 2 blue that can be controlled seperately with a little controller. $10
LED setup, 3 blue light and 1 spot for one but it's missing. This is one I made but works and is cool. $5 or free with something else other than the other LED.
Pin Point pH monitor, 2 years old, probe has been out of water so I think it needs to be replaced. $30
Acura 300w heater $10
30 gallon long $10
I can have pictures of everything once I find my camera.
Thanks a bunch
*Here are some pictures of the tank, skimmer, and panworld.
http://s111.photobucket.com/albums/n131/matlocka0491/Equipment/
90 gallon Oceanic bowfront, tank stand and canopy. 48" long, 27" high, and 18" wide in the middle. The stain is cherry oak. Everything looks fine except on the inside bottom of the stand the water damaged the stain. $400 obo
Beckett Skimmer (by Pete), single beckett but has a place for another. 26" tall, foot print is around 8"x11". $125
Panworld 150ps, 2 years old, works great w/ basically no rust. Used on the skimmer above and worked great. $75
Pacific Coast Imports regulator and selenoid, works perfectly, never used. $75
JBJ regulator and selenoid. One gauge is bent so it doesn't work and the bubble counter is missing. $25
LED setup, 2 red lights and 2 blue that can be controlled seperately with a little controller. $10
LED setup, 3 blue light and 1 spot for one but it's missing. This is one I made but works and is cool. $5 or free with something else other than the other LED.
Pin Point pH monitor, 2 years old, probe has been out of water so I think it needs to be replaced. $30
Acura 300w heater $10
30 gallon long $10
I can have pictures of everything once I find my camera.
Thanks a bunch