MAG HELP

[seamonkey2]

I got a mag 12 that keeps triping the GFCI, I try 3 different circuits and trip all 3

any Ideas??

I was thinking about pulling the ground plug on the mag

anybody with this problem before

thanks

Jose

[JimD]

Pull it apart and check the conditiopn of the impeller, if the shaft is worn or broken theres a good chance the inside wall may be damaged.

[Chicken_Eye]

also try a plug that comes straight off of your breaker box on its own breaker and see if it trips the breaker it very well could have a short (unlikely though)

[5.0Stang]

Its a short thats what was happening with my CSS 125 pump you dont even plug it in all the way and it trips the breaker. Call danner mag or w/e and ask to talk to their bosses boss depends on how old it was ya might get a new one!

[seamonkey2]

5.0stang, do you have a number I can use

thanks

jose

[alton]

GFCI's trip when there is an imbalance of 5 milli-amps between the grounded(white) and the ungrounded(black) conductors, not the grounding conductor(green).
http://www.dannermfg.com/infoS.asp#