2" slip bulkhead screen

[dwdenny]

I need a 2" Slip bulkhead screen does anyone know where to find them. I looked al most every where any help would be greatly appreciated

Doug

[brewercm]

Check this site and see if this may work. They also have a phone number you can possibly call and check.

http://www.ponds2go.com/ProductDetails.asp?ProductCode=PL0200

[dwdenny]

That things looks huge but might not be will have to give them a call thanks Cliff

[captexas]

I purchased some 2in screens awhile back I think from Custom Aquatics, but they are threaded, not slip.

[dwdenny]

Think I can make a threaded work? I dont think it will. I going to make some time and go by the Pool place here and see what they might have that will work if they have soem thing

[captexas]

Why wouldn't it work? Not sure what you are wanting to do it it, but they are male threaded fittings. If you are putting it straight on a bulkhead, most bulkheads are threaded on the inside so it will work fine. If you are attaching it to a pvc pipe, you just need a slip to female thread connector. On my old 75g tank, I had bulkheads on the backside of the tank towards the top and used a PVC elbow that female threads on one end to point up towards the surface and the screen fit it as well. As far as finding a slip fitting, with the larger the size PVC there tends to be fewer options on types of ends (slip, male, female).

[dwdenny]

The bulkhead that I have it slip on the inside that is why I was asking if it would work. No threads on the bulkhead(inside) I thought it might not stay on.