tunzee 7094 controller

[Gator]

does anyone understand how to get it working, i cant get mine to do anything when hooked up, :x :cry:

i am trying to hook up 2 pumps

[lax]

call aquatek

[Gator]

thanks i did not think of that

they closed at 7 and it is still not working, ithink i got a defective controller (or m abey defective user)

[RobertG]

Defective user! LOL Try setting it up like this. The mode setting is in the middle. The interval is at 1-7 & the pulse is at 3 seconds. Heres a pic of what you should see.

[Gator]

i set mine up but none of the lights on the bottom will light up or the far one on the left. does it matter when i plug the pumps into the power to set them up or not. thanks

[RobertG]

The switches on the side are the main setup, they will change the way those lights come on. If the one on the left is not on the pumps are not running. Unplug the setup both powers to the blue boxes. White plugs. Plug in the Patch cords from the controller to each blue box. The plugs need to be in the same position as mine pictured. Outside Plugs. Set the mode switch to the middle. Then I have the interval to 1-7. Plug them back in. Should come on. The red button is to stop the pumps for feeding. About 8 Min.

HTH

Robert

[RobertG]

Gator When you unplug the controller do the pumps run? Also there is a dial on the side of the blue box, Is this dial in the max position?

[Gator]

when i unplug the pumps they run fine once i plug them in they stop imediitly. the lightds in the middle move up and down to show the diffrence in power but the othet ones wont come on, i am going to send it back and get them to send me a new one. thanks for your help