Premium Aquatics or Custom Aquatic order

[Chris]

Dry goods or live stock?

[Chris]

I'll take a MagFloat 30 (http://www.premiumaquatics.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=PA&Product_Code =MAG-FLOATS&Category_Code=Algaecleaners) :-D

Send the PayPal bill to cpugh@satx.rr.com

[Troy Valentine]

Josh-


Are you familiar, or have you heard anything about the Korallin reactor C-1502? I have had my eye on this calcium reactor for a while now at Premium-

[Chris]

Troy I say you just go ahead and buy two and we'll both test them out and form our own opinions. :-o

[Derek B]

Josh, I sent you a pm with the same message, but wanted to make sure you got my adds before you placed the order.......Can you add the book "Corals: A quick Reference Guide" by Julian Sprung to my order? All in, my order now is:

-Salifert Alk/kh test Kit
-(2) 7.00 Pinpoint Calibration Fluid packets
-(2) 10.00 Pinpoint Calibration Fluid packets
-Julian Sprung book

Let me know if you get all of this in the order. Thanks

[Chris]

I'm not sure how much the calibration packets are, but Vinh ordered a bunch of them and you may be able to get them cheaper from him?

Here's the relevant part of the email he sent out...



I ordered some extra calibration solution packages at $2 per 2 packages.

You need two packages( ph of 7 and ph of 10) for each calibration.

I ordered 28 package of calibration solution. 14 packages have already been claimed, leaving 14 packages unclaimed.

-=Vinh=-

[Derek B]

Josh, instead of the Julian Sprung book, get me "Aquarium Corals" by Eric Borneman.

[TexasState]

Josh, if you haven't ordered yet,
I would like to buy one:
AQUA LIFTER VACUUM PUMP AW-20

Code: M3-AQUALIFT

http://www.premiumaquatics.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=PA&Product_Code =M3-AQUALIFT

If you could, can you please tell Jason/Corey or Jeremy that this same item cost $12 from MD.

[TexasState]

Troy,
I have two of these reactor.
Last August, I sold one of them to this guy:

http://www.mylittleocean.com/

He have a big 175 gallon Bowfront and 30 gallon sump.

You should email him and ask him how it's working out. It's not necessary, but he's using a pinpoint pH Controller to run the reactor.

-=Vinh=-

[TexasState]

Josh,
I'll pay it.

[Tim Marvin]

Do they want a new one or one that froze up after 3 days? I have lots of frozen burnt up one that have died in less than 6 months.

[TexasState]

I use a Mag 5, or 7 to mix my saltwater in that Rubbermaid trashcan. YOu can Rig up a Venturi to the Mag pump to aerate your saltwater mix too.

AFter the water has been mixed of a couple of days. I use the Mag to pump water straight into my tank during a water change.

[Derek B]

What's the point of waiting 2 days to add water?

[Tim Marvin]

I have to agree with you Josh. I have a rio 600 that made it for at least 3 days before frying.

[Tim Marvin]

Oh yeh, I almost forgot about the rio 90 that died in the first week of use also. I used to love Rio, Jim and I both, but They have turned out to be a terrible pump in the last couple years, and they are not thermally protected so they WILL shock the hell out of your tank when they go bad. Good luck guys.